Ballast flat roof mounting system
CR06-1 is a steel made ballasted roof mounting system, it is very easy to install because of the simple components, including the Z bracket, mid clamp and end clamp. Customers can also add a wind protection according to their own needs. This ballasted roof mounting system fit any sizes and any orientations of panels If you install it for a commercial project, the price is very advantageous.
Components List
|
|
|
|
|
|
End clamp |
Mid clamp |
Wind protection |
Z bracket |
Feature
|
Installation site |
Flat concrete rooftop |
|
Material |
HDG steel, Anodized Aluminum |
|
Foundation |
Ballasted |
|
Tilt angle |
5 °, 10 °, 15 ° |
|
Panel array |
Customized |
|
Wind load |
Up to 45m/s |
|
Snow load |
Up to 1.4 KN/M2 |
|
Standards |
ASCE7-10; EN 1990:2002/A1:2005 Eurocode;AS 1170 |
|
Warranty |
15 years |
CR06-1 is a steel made ballasted roof mounting system, it is very easy to install because of the simple components, including the Z bracket, mid clamp and end clamp. Customers can also add a wind protection according to their own needs. This ballasted roof mounting system fit any sizes and any orientations of panels If you install it for a commercial project, the price is very advantageous.
Components List
|
|
|
|
|
|
End clamp |
Mid clamp |
Wind protection |
Z bracket |
Feature
|
Installation site |
Flat concrete rooftop |
|
Material |
HDG steel, Anodized Aluminum |
|
Foundation |
Ballasted |
|
Tilt angle |
5 °, 10 °, 15 ° |
|
Panel array |
Customized |
|
Wind load |
Up to 45m/s |
|
Snow load |
Up to 1.4 KN/M2 |
|
Standards |
ASCE7-10; EN 1990:2002/A1:2005 Eurocode;AS 1170 |
|
Warranty |
15 years |